We provide switch-it! - DIY ESP8266 IoT online (apkid: com.switchit.app) in order to run this application in our online Android emulator.
Description:
Run this app named switch-it! - DIY ESP8266 IoT using MyAndroid.
You can do it using our Android online emulator.
What is switch-it! ?
switch-it! is a simple configurator, monitoring, and controller app for your D.I.Y ESP8266 IoT device.
You can use switch-it! for real-time monitoring and controling for example relay and motion sensor through WebSocket and MQTT.
All configuration can be done via the app, including Wi-Fi and MQTT setup, so there is no need to hardcode anything, at all.
Features
- One Time Binding , the app will store connected device locally, so you don't have to manually enter address of the ESP everytime you wan't to access it.
- 3 Device Registration, bind up to 3 ESP8266 device for free.
- MQTT, support control and monitoring through MQTT.
(Currently we only support, and tested MQTT implementation with HiveMQ broker).
- OTA Firmware Update, update device firmware through webserver.
- Auto Discovery, with mDNS service, the app will automatically look for configured ESP within the same local network.
- No Coding Required, we have provided a ready to flash firmware binary file.
All you need to do is to configure WiFi connection, and bind it with the app.
- State Persistance, the board will revert back to the state it is in before a restart, or power out.
- Pull to Refresh, for easy reconnection to all bonded ESP board.
- Board Reset, swipe card to unbind the ESP board, and reset it to Wi-Fi configuration mode.
Device List
- General I/O
- Motion Sensor
Setup Guide
Setup, wiring guide, and firmware can be found in our GitHub Repository, invoklab/switch-it GitHub Repository .
Got feedback? We'd love to hear it!
You can send us your feedback or any inquiries to
[email protected]
switch-it! is a simple configurator, monitoring, and controller app for your D.I.Y ESP8266 IoT device.
You can use switch-it! for real-time monitoring and controling for example relay and motion sensor through WebSocket and MQTT.
All configuration can be done via the app, including Wi-Fi and MQTT setup, so there is no need to hardcode anything, at all.
Features
- One Time Binding , the app will store connected device locally, so you don't have to manually enter address of the ESP everytime you wan't to access it.
- 3 Device Registration, bind up to 3 ESP8266 device for free.
- MQTT, support control and monitoring through MQTT.
(Currently we only support, and tested MQTT implementation with HiveMQ broker).
- OTA Firmware Update, update device firmware through webserver.
- Auto Discovery, with mDNS service, the app will automatically look for configured ESP within the same local network.
- No Coding Required, we have provided a ready to flash firmware binary file.
All you need to do is to configure WiFi connection, and bind it with the app.
- State Persistance, the board will revert back to the state it is in before a restart, or power out.
- Pull to Refresh, for easy reconnection to all bonded ESP board.
- Board Reset, swipe card to unbind the ESP board, and reset it to Wi-Fi configuration mode.
Device List
- General I/O
- Motion Sensor
Setup Guide
Setup, wiring guide, and firmware can be found in our GitHub Repository, invoklab/switch-it GitHub Repository .
Got feedback? We'd love to hear it!
You can send us your feedback or any inquiries to
[email protected]
MyAndroid is not a downloader online for switch-it! - DIY ESP8266 IoT. It only allows to test online switch-it! - DIY ESP8266 IoT with apkid com.switchit.app. MyAndroid provides the official Google Play Store to run switch-it! - DIY ESP8266 IoT online.
©2025. MyAndroid. All Rights Reserved.
By OffiDocs Group OU – Registry code: 1609791 -VAT number: EE102345621.
