We provide GNSSTool online (apkid: com.huace.gnssserver) in order to run this application in our online Android emulator.
Description:
Run this app named GNSSTool using MyAndroid.
You can do it using our Android online emulator.
Developed by CHC Technology Co., Ltd(www.chcnav.com), GNSSTool is a simple receiver configuration tool.
It is able to set all kinds of work modes and NMEA output for CHC receivers , making it be convenient for the third-party software working with CHC receiver.
GNSSTool supports CHC X91+/X900+ receiver with the firmware version of v8.35 and higher, and CHC i80 receiver with the firmware version of v1.3.36 and higher, as well as internal GPS of your Android smartphone and handheld controller.
Top Features:
1Convenient work mode management
Supports presetting of common work modes of base and rover, selecting or switching
work modes by one button push.
2Multiple NMEA output ways
Support output NMEA data via Bluetooth, Serial port and WIFI.
Any other software supporting generic NMEA data is able to receive the NMEA data with differential correction value from CHC receivers.
3Three connection types
Support Bluetooth, WIFI and demonstration connection.
Demonstration module allows users to input the coordinates and simulate it as the current position.
4Hardware support
GNSSTool can operate on all Android devices from different manufacturers with the OS version 2.3 and higher, CHC provides all users free trail till 1st September 2017.
Please note: Quick guide of GNSSTool can be downloaded from the following link.
https: //drive.google.com/open?id=0B_xiWu0PohSbNkpjUHZ3RWdIT1U
Any other problem, please contact [email protected].
It is able to set all kinds of work modes and NMEA output for CHC receivers , making it be convenient for the third-party software working with CHC receiver.
GNSSTool supports CHC X91+/X900+ receiver with the firmware version of v8.35 and higher, and CHC i80 receiver with the firmware version of v1.3.36 and higher, as well as internal GPS of your Android smartphone and handheld controller.
Top Features:
1Convenient work mode management
Supports presetting of common work modes of base and rover, selecting or switching
work modes by one button push.
2Multiple NMEA output ways
Support output NMEA data via Bluetooth, Serial port and WIFI.
Any other software supporting generic NMEA data is able to receive the NMEA data with differential correction value from CHC receivers.
3Three connection types
Support Bluetooth, WIFI and demonstration connection.
Demonstration module allows users to input the coordinates and simulate it as the current position.
4Hardware support
GNSSTool can operate on all Android devices from different manufacturers with the OS version 2.3 and higher, CHC provides all users free trail till 1st September 2017.
Please note: Quick guide of GNSSTool can be downloaded from the following link.
https: //drive.google.com/open?id=0B_xiWu0PohSbNkpjUHZ3RWdIT1U
Any other problem, please contact [email protected].
MyAndroid is not a downloader online for GNSSTool. It only allows to test online GNSSTool with apkid com.huace.gnssserver. MyAndroid provides the official Google Play Store to run GNSSTool online.
©2025. MyAndroid. All Rights Reserved.
By OffiDocs Group OU – Registry code: 1609791 -VAT number: EE102345621.