We provide civstraw005 online (apkid: com.civ.civstraw005) in order to run this application in our online Android emulator.
Description:
Run this app named civstraw005 using MyAndroid.
You can do it using our Android online emulator.
What you can do with IC-705 control civstraw (civstraw005)
*Must be paired with ICOM IC-705 via bluetooth
If you can't connect to the IC-705, turn off the bluetooth on your smartphone and turn it on to make it easier to connect.
*When you are offline, you can change the CIV address by performing List read on P.3 and reading the CIV address.TXT.
*Turn on the transceiver of the device MENU SET > External Terminal > CI-V CI-V Transceiver ON
1.
Reading and writing frequency list
1) Since pre-information is written in ROM_assets (read-only), read it
2) With the save tap, it is restored to a readable and writable file (RAM_writable)
3) You can change the list with (RAM_Writable)
4) Tap READ frequency book to read
2.
Utilization of list
1) Send information to the transceiver by frequency, mode (LSB.
etc.), filter (FIL1.
etc.) tap
2) Tap the scan button (STOPSTART) to scan the frequencies on the list, and open the squelch to stop for about 2 seconds.
3) You can change the frequency information (list) with the filter tap
4) Frequencies and memos can be sorted in ascending or descending order
5) Swipe the row to the left to delete
6) To rearrange one row, touch the row to move it up or down
7) Commands are pre-registered for experimentsOperation of valid commands on P.2
3.
Frequency change
1) Change by operating the slide bar or tapping the frequency display
4.
Voice, squelch level, variable notch, IF adjustment, voice, squelch level, variable notch, IF adjustment, voice
1) P.1 button tap or P3 right image tap
5.
Finish The finish button is on p.3.
1) There is an end button on P.3
6.
CIV address and Bluetooth device name settings
1) Read the CIV address in the frequency book and tap the corresponding model
* We have not confirmed anything other than IC-705, so please change it in the list
* Valid with CIV address .TXT under READ frequency book (return with READ frequency book tap)
7.
About frequency steps
1) It is not a setting inside the device
*Can be changed step by step from 0.001 to 10000KHz
2) Transceiver TS settings are also implemented
8.Energy saving sw
1) To read the S meter, frequency, etc., a timer is used to issue commands, so turn it on if you are concerned about battery consumption.
*Must be paired with ICOM IC-705 via bluetooth
If you can't connect to the IC-705, turn off the bluetooth on your smartphone and turn it on to make it easier to connect.
*When you are offline, you can change the CIV address by performing List read on P.3 and reading the CIV address.TXT.
*Turn on the transceiver of the device MENU SET > External Terminal > CI-V CI-V Transceiver ON
1.
Reading and writing frequency list
1) Since pre-information is written in ROM_assets (read-only), read it
2) With the save tap, it is restored to a readable and writable file (RAM_writable)
3) You can change the list with (RAM_Writable)
4) Tap READ frequency book to read
2.
Utilization of list
1) Send information to the transceiver by frequency, mode (LSB.
etc.), filter (FIL1.
etc.) tap
2) Tap the scan button (STOPSTART) to scan the frequencies on the list, and open the squelch to stop for about 2 seconds.
3) You can change the frequency information (list) with the filter tap
4) Frequencies and memos can be sorted in ascending or descending order
5) Swipe the row to the left to delete
6) To rearrange one row, touch the row to move it up or down
7) Commands are pre-registered for experimentsOperation of valid commands on P.2
3.
Frequency change
1) Change by operating the slide bar or tapping the frequency display
4.
Voice, squelch level, variable notch, IF adjustment, voice, squelch level, variable notch, IF adjustment, voice
1) P.1 button tap or P3 right image tap
5.
Finish The finish button is on p.3.
1) There is an end button on P.3
6.
CIV address and Bluetooth device name settings
1) Read the CIV address in the frequency book and tap the corresponding model
* We have not confirmed anything other than IC-705, so please change it in the list
* Valid with CIV address .TXT under READ frequency book (return with READ frequency book tap)
7.
About frequency steps
1) It is not a setting inside the device
*Can be changed step by step from 0.001 to 10000KHz
2) Transceiver TS settings are also implemented
8.Energy saving sw
1) To read the S meter, frequency, etc., a timer is used to issue commands, so turn it on if you are concerned about battery consumption.
MyAndroid is not a downloader online for civstraw005. It only allows to test online civstraw005 with apkid com.civ.civstraw005. MyAndroid provides the official Google Play Store to run civstraw005 online.
©2024. MyAndroid. All Rights Reserved.
By OffiDocs Group OU – Registry code: 1609791 -VAT number: EE102345621.