CameraVision

CameraVision outputs the images of the built-in camera and the corresponding sounds from the built-in microphone to an external device such as a projector or a TV monitor.
This application can be used similar to a document camera (overhead projector) or a live camera to project documents, objects, people or scenes onto a large screen.
In addition, showing a still image from Photo Albums is possible.
A dock/Lighting-connector adapter/cable can be used and the wireless transfer to Apple TV (AirPlay) is also supported.

The following adapters/cables are supported:

- Lightning to VGA Adapter

- Lightning Digital AV Adapter (HDMI)

- Apple VGA Adapter

- Apple Digital AV Adapter (HDMI)

- Apple Composite AV Cable

- Apple Component AV Cable

- Apple TV (2nd generation and later)

This application has the functions listed below.
You can set them up easily using the buttons on the screen.

- Rear camera / front camera switching

- Camera image resolution switching from SD (640x480 pixels) up to Full HD (1920x1080 pixels)

- External display image resolution switching from SD (640x480 pixels) up to Full HD (1920x1080 pixels)

- Scale mode switching of Fit, Fill or Resize

- Image rotation switching of Rotatable or Fixed

- Image pausing or playing

- Flash light switching

- Audio output from microphone

- Display of an on-screen pointer at touched position

- Display of a grid image - useful to adjust image projection

- Display of setting informations on an external display

- Image black out switching

- Automatic adjustment of focus, exposure and white balance

- Displaying a still image from Photo Albums

- Image zooming by double-tap or pinch

- Paused image saving and sharing

* These functions depend on devices and adapter/cables used.

* Please unplug and then plug your dock adapter/cable if no image is shown on the external display properly.

* Microphone input can be sent to an external speaker via HDMI, Composite or Component cable with the camera image.
It can be sent wirelessly to Apple TV (AirPlay).
When using a VGA cable, plug an audio cable to iPhones headphone jack.

* To work with Apple TV, tap the home button twice, then go to the leftmost page, tap the AirPlay button, select your Apple TV and turn on mirroring.

iOS: Use AirPlay Mirroring

http: //support.apple.com/en-us/HT201335,

Page navigation:

• < Prev
• Next >