IP Test - Bandwidth test

This app allows you to test IP connectivity and rates from your mobile device and a remote host.

== User guide ==

--- Download test ---

Enter the http url to download from

--- Upload Test ---

1/ on the destination launch an app accepting tcp and udp traffic on a given port (4242 for instance).
This app should discard data to ensure the bandwidth is not limited by cpu processing on target.

eg: on target you can launch

# while : ; do nc -l -p 4242 > /dev/null; done

2/ launch the app and fill the correct destination (eg: 192.168.1.254: 4242) and press connect

3/ the device will start sending data to the destination target.

== Options ==

- You can specify the payload size: 5MB, 20MB, 50MB ., or random size (max: 500MB)

- You can run the test in loop mode

- You can wait some time between each test

- You can get UDP rates reporting on port + 1 (for instance 192.168.1.254: 4243)

- The device can vibrate on transfer failure (rate of 0 bytes/s)

- You can send UDP traffic in parallel of TCP traffic (you can choose the number of packets / seconds to send),

Page navigation:

• < Prev
• Next >