iPhone app RS-R30I

RS-R30I is a remote control application for the ICOM Wideband Handy Receiver IC-R30.

You can operate and change the receivers settings using an iPhone or iPad, and you can also check

its settings.

Device requirements:

iOS version 9.0 or later for 64 bit CPU models.

Supported receiver:

Icom IC-R30

Refer to the instruction manual for details.

NOTE:

- The RS-R30I does not guarantee compatibility with all iPhones and iPads.

It may not work, depending on its OS version, installed applications, and so on.

`- Confirm the IC-R30s Serial port function is set toCI-V (Echo Back OFF)` +

( [MENU] > Bluetooth Set > Data Device Set > Serialport Function )

- Bluetooth LE is used to connect with the IC-R30 and it is a slow data transfer.

So there may be a time delay between the receivers operation and the display on the data device.

In addition, depending on the receiver environment, it may not be able to operate properly.

- Bluetooth may be disconnected in the following cases:

The screen of the device is locked.

The application is running in the background mode.

Wi-Fi is enabled.

Connecting or removing a Bluetooth headset.,

Page navigation:

• < Prev
• Next >