iPhone app CallStart

CallStart

GSM SINGLE CHANNEL REMOTE CONTROLLER

Once you have installed the unit and inserted the Sim Card, you can now

power up the system and the 3 LED lights will oscillate infrequently until

the BLUE LED flashes every 3 seconds and the system is now on line,

connected to the network and can now be programmed.

The first thing to set up is to add the Administrator who will be the only

number that can program and change the parameters of the system.

You would hold the reset button down and release after a few seconds

and the BLUE LED will stay illuminated and you would now call the unit

and the system will register the number as the administrator, the unit will

now send the following similar S.M.S confirmation as : ADMIN SAVE OK

The Administrator can now program the system functions using the

following instructions and SMS formats.,

Page navigation:

• < Prev
• Next >