iPhone app WoodScaper

WoodScaper combines into one unit the 4 classic guitar effects : phaser, chorus/flanger, wah-wah and tremelo.
Besides the familiar controls each effect has some extra not-so-commonly-found options.
The 4 effects can be routed in series (pedalboard mode), parallel (DAW mode) or some combinations of those modes.
Panning or the Stereo control can create stereo sounds from a mono input source.
WoodScaper is both stand-alone and an AUv3 effect.

- All LFOs can be set to different waveforms : Sine, Square, Saw Up, Saw Down, Triangle.

- All LFO frequencies can be set to a bar fraction (1/4, 1/8 , ) of the BPM or can be set free to a specific rate

(independent from the BPM).

- All LFO phases can be reset with a button.

- All effects have an On/Off (parallel routing) or On/Bypass (serial routing) switch like on a pedalboard.
The switches can

be toggled by Midi CCs.

- Phaser has settings for number of poles, frequency range and modulation flavour.

- Phaser has second LFO to modulate filter Q.

- Chorus has feedback, HighPass, LowPass and Saturation.

- Wah-wah control can be LFO, Envelope, Envelope + LFO, side chain, Midi note velocity or Midi CC 1 (mod wheel).

- Wah Envelope has Attack, Release and Threshold or Sensitivity controls.

- Wah can go up or down.

- Wah filter type and Q can be set.

- Tremolo has 3 types : Amplitude, Ring or Harmonic.

- Harmonic Tremolo has cross-over frequency control.

- Tremolo has a Threshold control to have more tremolo when the signal increases.

- Tremolo has Biased Tremolo mode to get more tremolo when the signal decreases.

- Has a global Input and Output Gain control.

- Has 2 extra LFOs to modulate most parameters (rates, depths, )

- Modulation LFOs have their own slew rate control and a random mode.

- Presets can be stored in iCloud Drive (makes them available on all your devices).

- Presets can be switched with Midi Program Changes or a Midi CC (up or down)

- Major controls can be set with Midi CC messages.,

Page navigation:

• < Prev
• Next >