iPhone app SpeedyBee App

SpeedyBeeisan Appllication for Flight controller parameters settings.

Communication between mobile devices and flight control boards can be achieved through Bluetooth, you can use mobile devices to set the parameters of the flight controller.Any Bluetooth module compatible with your mobile device can be used, but if using the SpeedyBee Bluetooth-UART Adapter, this Bluetooth module will deactivate and activate automatically according to the status of the drone(armed/disarmed), no Bluetooth signal interference during the flight.

FlightControllerRequirements:

Betaflight firmware version 3.1.0

iNav FC version 1.8.1

Butterflight firmware version 3.1.0

SystemRequirements : iOS 10.0+

Instructionsforuse

1.ConnecttheBluetoothPCBwiththeUARTinterfaceoftheFlightController,orusetheflightcontrollerintegratedBluetooth.

2.OpentheBetaflightConfigurator,onthePortstab,opentheConfiguration/MSPportoftheBluetoothPCB, for the Bluettooth module of BLE4.0, 19200 is the recommended baud rate value.

3.OpentheAPP,connecttheFlightControllerviaBluetooth,andyoucanadjusttheparametersnow.,

Page navigation:

• < Prev
• Next >