We provide CarPowerTest FULL - dyno bench online (apkid: appinventor.ai.oliviervalenti.car.power.test) in order to run this application in our online Android emulator.
Description:
Run this app named CarPowerTest FULL - dyno bench using MyAndroid.
You can do it using our Android online emulator.
No connection needed.
Just drive!
Get Max Power and torque of your engine.
This app is engineered to be as accurate as possible, whatever the car, or the phone it is used with, thanks to exclusive processing.
You don't need any connection to use it, the processing is based on your mobile phone's accelerometer sensors.
The accuracy is very close to a real engine dyno bench, but of course much cheaper.
It has been developped as a diagnostic tool, as a dynometer bench would be, perfect for detecting power losses or improvements (after ECU remapping for example).
0/ Calibrate, once for lifetime.
It's very easy and will take you less than 1 minute.
1/ Set parameters (total mass of your car, and Cda if you know it)
2/ Passenger hang tight the device as shown on figure below.
3/ Check there is nothing on the track on which you make the test.
Car must be totally motionless.
4/ Click "Start", and when first LED indicator appears (green), start off in first gear.
Don't be brutal, there's no need and it may be cause of inaccuracy.
Engage smoothly 2nd gear, and then you can go full throttle until car's red zone.
Then release throttle
5/ Drive normally until the end of processing (>10s)
6/ Check the Measurement Reliability indicator
7/ CHECK POWER CURVE/ To get full graph with RPM and TORQUE CURVE, enter speed of your car when engine is at 2000 rpm in 2nd gear
After that, you can also SHARE your results on social networks.
TERMS OF USE:
Use on circuit only, not on open roads.
Driving is not a game, don't take any risk.
The developper cannot be made responsible in case of any pecuniary, physical, or moral.
Just drive!
Get Max Power and torque of your engine.
This app is engineered to be as accurate as possible, whatever the car, or the phone it is used with, thanks to exclusive processing.
You don't need any connection to use it, the processing is based on your mobile phone's accelerometer sensors.
The accuracy is very close to a real engine dyno bench, but of course much cheaper.
It has been developped as a diagnostic tool, as a dynometer bench would be, perfect for detecting power losses or improvements (after ECU remapping for example).
0/ Calibrate, once for lifetime.
It's very easy and will take you less than 1 minute.
1/ Set parameters (total mass of your car, and Cda if you know it)
2/ Passenger hang tight the device as shown on figure below.
3/ Check there is nothing on the track on which you make the test.
Car must be totally motionless.
4/ Click "Start", and when first LED indicator appears (green), start off in first gear.
Don't be brutal, there's no need and it may be cause of inaccuracy.
Engage smoothly 2nd gear, and then you can go full throttle until car's red zone.
Then release throttle
5/ Drive normally until the end of processing (>10s)
6/ Check the Measurement Reliability indicator
7/ CHECK POWER CURVE/ To get full graph with RPM and TORQUE CURVE, enter speed of your car when engine is at 2000 rpm in 2nd gear
After that, you can also SHARE your results on social networks.
TERMS OF USE:
Use on circuit only, not on open roads.
Driving is not a game, don't take any risk.
The developper cannot be made responsible in case of any pecuniary, physical, or moral.
MyAndroid is not a downloader online for CarPowerTest FULL - dyno bench. It only allows to test online CarPowerTest FULL - dyno bench with apkid appinventor.ai.oliviervalenti.car.power.test. MyAndroid provides the official Google Play Store to run CarPowerTest FULL - dyno bench online.
©2025. MyAndroid. All Rights Reserved.
By OffiDocs Group OU – Registry code: 1609791 -VAT number: EE102345621.