We provide LocoMotive DCC online (apkid: appinventor.ai.bill.falkland.locomotive.dcc) in order to run this application in our online Android emulator.
Description:
Run this app named LocoMotive DCC using MyAndroid.
You can do it using our Android online emulator.
For use with my hardware ONLY - The easiest ever self build of a fully functional DCC Command station with PCB available on eBay plus only a few parts.
eBay link:
https: //www.ebay.co.uk/itm/232955350950
The App formats each DCC packet for transmission via Bluetooth to Arduino Pro Mini connected to a h-bridge to form a simple DCC command station with few parts.
* Control of 1 to 127 locos
* Speed control of up to 4 locos at a time
* Speed bars for course control and _/+ buttons for fine control
* Ideal for small to medium size layouts
* 2 Amps load drives up to 16 of OO/HO locomotives using H-bridge specified
* Add a higher current compatible h-bridge to extend load capacity
* Short circuit protected
* Automatic over current cut-out, adjustable in Arduino code
* Lights and direction
* Functions 1 to 28 with titles, visible and momentary options
* Turnout / points / accessories 16 pairs of outputs
* Custom naming of your locos
* Programming the CV1 loco address
* Read and write CV 1 to 255
* Add your own accessory addresses
* Names and max speed for each loco
* Choose a DC power source to suit scale used (Z/N/OO/HO/O/G) 12v to 20v
* Free software for Arduino - no restrictions on use or changes if required
* Learn from the code on how DCC commands are used
* Easy DIY circuit can be soldered on available 50 x 50 mm PCB (on sale on eBay.uk )
* App forms the DCC packets transmitted to Arduino circuit with 15 components
* Continuous DCC data flow from Android device to Arduino
* New Arduino sketch
* PCB available for purchase on eBay
Further to previous work on DCC wireless systems, I have developed a Bluetooth Command Station linked to a receiver Arduino based circuit with a HC-06 BT module and a LMD18200 H-bridge Motor driver delivering 2 Amps.
The overall cost of parts is around
eBay link:
https: //www.ebay.co.uk/itm/232955350950
The App formats each DCC packet for transmission via Bluetooth to Arduino Pro Mini connected to a h-bridge to form a simple DCC command station with few parts.
* Control of 1 to 127 locos
* Speed control of up to 4 locos at a time
* Speed bars for course control and _/+ buttons for fine control
* Ideal for small to medium size layouts
* 2 Amps load drives up to 16 of OO/HO locomotives using H-bridge specified
* Add a higher current compatible h-bridge to extend load capacity
* Short circuit protected
* Automatic over current cut-out, adjustable in Arduino code
* Lights and direction
* Functions 1 to 28 with titles, visible and momentary options
* Turnout / points / accessories 16 pairs of outputs
* Custom naming of your locos
* Programming the CV1 loco address
* Read and write CV 1 to 255
* Add your own accessory addresses
* Names and max speed for each loco
* Choose a DC power source to suit scale used (Z/N/OO/HO/O/G) 12v to 20v
* Free software for Arduino - no restrictions on use or changes if required
* Learn from the code on how DCC commands are used
* Easy DIY circuit can be soldered on available 50 x 50 mm PCB (on sale on eBay.uk )
* App forms the DCC packets transmitted to Arduino circuit with 15 components
* Continuous DCC data flow from Android device to Arduino
* New Arduino sketch
* PCB available for purchase on eBay
Further to previous work on DCC wireless systems, I have developed a Bluetooth Command Station linked to a receiver Arduino based circuit with a HC-06 BT module and a LMD18200 H-bridge Motor driver delivering 2 Amps.
The overall cost of parts is around
MyAndroid is not a downloader online for LocoMotive DCC. It only allows to test online LocoMotive DCC with apkid appinventor.ai.bill.falkland.locomotive.dcc. MyAndroid provides the official Google Play Store to run LocoMotive DCC online.
©2025. MyAndroid. All Rights Reserved.
By OffiDocs Group OU – Registry code: 1609791 -VAT number: EE102345621.