skyglyph aero scouter unreleased

We provide Skyglyph Aero Scouter (Unreleased) online (apkid: skyglyph.aero.scouter.unreleased) in order to run this application in our online Android emulator.


Description:

General process:
1. Remove DJI GO and other apps working via cable with your drone from default apps (settings\apps\default apps\default app selection\DJI Go\Clear defaults)
2. Check your drone, battery and remote controller;
3. Connect your phone with AeroScouter installed to the Remote controller by standard cable (same as you are using for DJI GO);
4. Turn on the remote controller and allow using of USB connection for AeroScouter;
5. Turn on the drone and wait for the message "Drone is connected";
6. Select your mission, check the border (edit or draw the border if it is needed);
7. Check flight parameters (altitude, speed, direction) and home point;
8. Press Takeoff button and wait for landing (control position and flight parameters of the drone);
9. Upload photoset into your mission in Skyglyph Cloud after landing for further processing.

Currently the application tested with:
- Mavic Pro,
- Phantom 4 Advanced,
- Matrice 100.

But it should also work with drones listed below.
Please contact Skyglyph Support Team before using with these drones:
- Phantom 4
- Inspire 1
- Inspire 2
- Matrice 200
- Matrice 210
- Matrice 210
- Matrice 600
- Matrice 600 Pro
! Your android device should be connected to the remote controller via the USB cable !
! DJI GO and other apps working via cable with your drone should be removed from Default Apps !

< Updates:
Get it from Google Play < �

MyAndroid is not a downloader online for Skyglyph Aero Scouter (Unreleased). It only allows to test online Skyglyph Aero Scouter (Unreleased) with apkid skyglyph.aero.scouter.unreleased. MyAndroid provides the official Google Play Store to run Skyglyph Aero Scouter (Unreleased) online.

©2024. MyAndroid. All Rights Reserved.

By OffiDocs Group OU – Registry code: 1609791 -VAT number: EE102345621.